Cranes - Dollies & Remote Heads

THE PEEWEE III Plus

PEEWEE® FEATURES

SUPER PEEWEE III+ Incorporates a New Improved Universal Head with Convenient 4-Way Levelling
Universal Head Has a Built-In Rotating Offset with Lock Off Points Every 15 Degrees
Universal Head Has a Variable Head Mount, with Four Positions for Quick Placement of the Camera at Different Heights
SUPER PEEWEE III+ Incorporates Brakes on Rear Wheels
SUPER PEEWEE III+ Is Nickel Plated for Less Maintenance
SUPER PEEWEE III+ Incorporates the Universal Stop Valve System
Variable Chassis Leg Adjustment Cam-Lock Chassis
Hardened Stainless Steel Bushings
Works on Both Straight and Curved Tubular Track
Compact and Lightweight for Travel and Storage
Variety of Tires Available
Rear Controlled Steering
Vertical Arm Travel
Corrected Steering Geometry
Auxiliary Air Tank
Enclosed King Pin System
Electric Pump System
Many Accessories Available

** Also available are other models of the PeeWee

Made in America: Making of the Chapman PeeWee Camera Dolly

Overkeeper / Slider
Available in 24", 36" and 48" configurations
Available with Mitchell Base

Mini-Mike Dolly

- Adaptable to run on track or pipe
- Set your tripod and away you go

Wally PipeDolly Kit
- Adaptable to run on pipe or track
- Set up on table top or set it up on legs to get the perfect shot
- Multiple pipe lengths available 2' - 20'
- Available with Mitchell base and option to add bowl mount configurations

Focus Micro Jib
PRODUCT FEATURES:

Simplicity of design allows this practical jib arm to lift a maximum of 40 lbs. (including head) to a distance of 48". Bowl size is 100mm. Extension from center post to camera is 36". The extending weight arm holds barbell weights which act as a counterbalance for the camera head which may be positioned and rotated as required. It can be mounted on a 100mm or 150mm bowl, or Mitchell mount tripod or dolly base.

The PORTA JIB by Losmandy

Reach 57" (145cm) - Boom 72" (183cm)
Wt. 60 lbs. (27kg)

Designed to carry up to 100 lbs. (45kg) of camera and fluid head weight, this is the most versatile of all lightweight jibs.
Assembles in less than 5 minutes. No tools required. All parts are machined aluminum and stainless steel. Boom and pan lock included.

36" EXTENSION KIT
- Increases Reach to 92" (234cm)
- Increases Boom to 131" (333cm)
- Note: Recommended weight capacity: 45 lbs. (20kg.)
- Extra counter weights will be needed.
It takes 30 lbs. to balance the extended front, and the camera/fluid head needs 2.2X weight to balance.

THE PICCOLO

Egripment's Piccolo is a compact, nimble, easy to operate crane ensuring absolute stability on all terrains or in a small room. It is manufactured from aerospace duraluminium, but its uniqueness lies in the fact that the crane arm folds down with the column onto the dolly base. This is achieved using a Hydraulic Assist System. Due to this "H.A.S.", the complete crane can be set up in less then 3 minutes and makes the Picollo the ultimate in crane technology for quick and easy transportation. With the Picollo, the adjustment from the minimum low to the maximum height can be made in one movement, without the need for separate platform brackets.
The crane arm is delivered complete with a seat system, stabilizing bars, fine adjustment weight and a counterweight bucket with a locking device.

The Egripment's Piccolo crane is especially designed to offer the benefits of a rideable crane in smaller studios, or on location. With a platform that can carry up to 250 kg. (550 Lbs.) (2 persons, plus camera and seat support,) the Piccolo crane offers a crane movement from 20 cm to 310 cm high. Because the Piccolo is folded onto its own dolly, it is extremely handy and portable for transportation. The dolly is equipped with hard rubber wheels and track wheels. The Piccolo is rentable with or without operators.

View Instruction Manual PDF.

Instructional Video on how to Assemble the Piccolo Crane

THE SWISS-JIB

Constructed entirely of Carbon Fibre and Aluminum, the SWISS-JIB is a lightweight, portable remote head crane designed for set up by two people in under fifteen minutes. Its modular design allows length from a minimum reach of 9' to a maximum of 42', yet its simplified design and fast locking systems make this crane easy to assemble.

Length changes are a snap and this save your production both time and money. Invented by a cinematographer, it is ideally suited for both motion picture and video cameras.

Its Carbon Fibre sections make it easy to transport and set up while combining maximum stiffness with minimum weight, thereby diminishing momentum when the arm is set in motion. This makes for easier stops and starts, giving you more fluid, steadier shots.

The levelling rods are built onto each arm segments giving the SWISS-JIB the smallest profile of any remote head crane.

Swiss engineering has truly produced the best remote head crane in the business.

View Instruction Manual PDF.

Version 6
Lens height Oversling: Undersling: Lrnght pivot-lens: Maximum load: With barcing kit:		36'5" 31'5" 41'5" N/A 55lbs

THE PERAMBULATOR

The Perambulator was designed to follow the action on a set with ease and quietness. The Perambulator front wheels can be adjusted to go through a narrow door or adjusted wider for stability when the platform is extended and an operator is on board. Steering wheel swivels 180¡ and has a tiller operated brake.

View Spec Sheet